Yes, local USB sticks can be used with Remote Desktop. When you connect to a remote desktop session, you can choose to share your local resources, including USB devices such as USB sticks. This allows you to access and use the files on your USB stick from the remote desktop session as if it were connected directly to the remote computer. However, it's important to note that the remote desktop server must have the necessary permissions and settings enabled to allow for the sharing of local USB devices. **

To charge a remote-controlled mini helicopter via USB, you will need to locate the USB charging port on the helicopter. Once you have found the port, you can connect the mini helicopter to a USB power source, such as a computer, laptop, or USB wall adapter. Make sure to use the appropriate USB cable that is compatible with the helicopter's charging port. Once connected, the helicopter will start charging and the LED indicator light on the helicopter will typically turn on to indicate that it is receiving power. It is important to follow the specific instructions provided by the manufacturer to ensure safe and proper charging of the mini helicopter. **

Yes, an infrared remote control can be converted into a USB controller with the help of an infrared receiver and some additional hardware and software. The infrared receiver can be connected to a USB port on a computer, and the remote control can be programmed to send signals to the receiver. With the right software, the computer can then interpret these signals as commands, effectively turning the remote control into a USB controller. However, this process may require some technical knowledge and expertise in electronics and programming. **

One can use Remote Desktop to access a computer from anywhere in the world as long as there is an internet connection. This means that one can remotely connect to a computer located in a different country or even on a different continent. The only requirement is that the computer being accessed must be turned on and connected to the internet. **

The password for the USB remote connection of the Fritzbox can typically be found in the Fritzbox's settings menu. You can access the settings by logging into the Fritzbox's web interface using a web browser and entering the necessary credentials. Once logged in, navigate to the USB remote connection settings section to locate and view or change the password as needed. If you are unable to locate the password in the settings, you may need to contact your internet service provider or the manufacturer for assistance. **

There could be several reasons why the printer is suddenly not recognized by the Fritzbox USB remote connection. It could be due to a loose connection between the printer and the Fritzbox, a malfunction in the USB port, or a problem with the printer's drivers. It's also possible that the Fritzbox itself is experiencing technical issues that are preventing it from recognizing the printer. Troubleshooting steps such as checking the connections, restarting the devices, and updating the printer drivers may help resolve the issue. If the problem persists, contacting technical support for further assistance may be necessary. **

Yes, the Fritzbox 7340 can be used simultaneously as a NAS (Network Attached Storage) and for USB remote access. The Fritzbox 7340 has a USB port that can be used to connect an external hard drive, turning it into a NAS for storing and sharing files within the network. Additionally, the USB remote access feature allows users to access the files on the connected external hard drive from outside the network, providing remote access to the stored data. This makes the Fritzbox 7340 a versatile and convenient solution for both local and remote file storage and access. **

If you don't have a remote control, you can try using the buttons on the TV itself to switch back from the USB device to the HDMI ports. Look for buttons labeled "Input" or "Source" on the TV and press them to cycle through the available input options until you reach the HDMI port you want to use. If your TV doesn't have these buttons, you may need to check the TV's manual or contact the manufacturer for specific instructions on how to switch inputs without a remote control. **