Yes, jointing sand can help prevent weeds from growing in between pavers or stones. The sand fills the gaps between the pavers, making it difficult for weeds to take root and grow. Additionally, jointing sand can also help to stabilize the pavers and prevent them from shifting, which can further inhibit weed growth. However, it is important to note that while jointing sand can be effective in preventing weeds, it may not completely eliminate them, and regular maintenance may still be necessary. **

To remove jointing mortar from paving, you can start by using a stiff brush to sweep away any loose debris. Then, you can use a chisel and hammer to carefully chip away at the mortar, being careful not to damage the paving stones. Another option is to use a power washer to blast away the mortar, but this method should be used with caution to avoid damaging the paving. Once the majority of the mortar is removed, you can use a solution of water and muriatic acid to dissolve any remaining residue, followed by a thorough rinsing with clean water. **

Concrete paving slabs are laid with jointing sand by first preparing the base with a layer of compacted sand or gravel. The slabs are then laid in the desired pattern, leaving a small gap between each slab for the jointing sand. Once the slabs are in place, the jointing sand is spread over the surface and swept into the gaps, ensuring that the sand fills the joints completely. Finally, the surface is compacted with a plate compactor to settle the slabs and lock the jointing sand in place. This process helps to create a stable and durable surface for the paving slabs. **

For exposed aggregate concrete pavers, a polymeric sand jointing compound is suitable. Polymeric sand is a mixture of fine sand and polymer additives that, when activated with water, creates a strong bond that helps to lock the pavers in place. It also helps to prevent weed growth and insect infestation between the pavers. Additionally, polymeric sand comes in a variety of colors to match the pavers, providing a cohesive and aesthetically pleasing finish. **

One can use Remote Desktop to access a computer from anywhere in the world as long as there is an internet connection. This means that one can remotely connect to a computer located in a different country or even on a different continent. The only requirement is that the computer being accessed must be turned on and connected to the internet. **

Yes, the screen was turned off during the remote maintenance. This is a standard security practice to ensure that sensitive information displayed on the screen is not visible to the remote technician. It also helps to prevent any unauthorized access or viewing of the user's data during the maintenance process. **

To turn the TV and soundbar on and off with the Apple TV Remote (Siri Remote), you can use the HDMI-CEC feature. First, make sure your TV and soundbar support HDMI-CEC. Then, connect your Apple TV to your TV and soundbar using HDMI cables. Once connected, you can use the Siri Remote to turn on and off the TV and soundbar by pressing the power button on the remote. This will send the power commands through the HDMI-CEC connection to control the devices. **

The signal of an infrared remote control typically reaches a range of about 30 feet (9 meters) in a direct line of sight. However, this range can vary depending on the strength of the remote control and any obstructions between the remote and the device being controlled. Infrared signals do not pass through walls or other solid objects, so the range may be limited in certain situations. **